Externally Funded Projects

VON ARDENNE is cooperating with numerous partners in science, research and the industry to work on the technologies of the future.

Being one of the leading providers of vacuum coating solutions, VON ARDENNE contributes its competency to many projects. In those projects, promising findings of basic research in the laboratory are scaled up to industrial scale.

VON ARDENNE is actively engaged in the following projects, that are funded by the Free State of Saxony, the German government and the European Union:


PolySafe

Steigerung der Sicherheit von Lithium-Ionen-Batterien durch Metall- Polymer-Komposit-Stromkollektoren

Ziel von PolySafe ist es, die Sicherheit von Lithium-Ionen-Batterien durch den Einsatz neuartiger Stromkollektoren zu steigern. Im Fokus stehen dabei Metall-Polymer-Komposit-Stromkollektoren, die das thermische Durchgehen von Batteriezellen verhindern und damit die Brandgefahr verringern. Die Machbarkeit der Herstellung der Metall-Polymer-Stromkollektoren wurde bereits gemeinsam von der VON ARDENNE GmbH und dem Fraunhofer FEP im Rahmen des sächsischen Forschungsvorhabens PolyCollect demonstriert. Allerdings existieren bisher zu wenige Daten aus Prototypzellen mit diesem Material, weshalb die anwendungsnahe Evaluation dieser Technologie noch aussteht. Neben der Integration der hergestellten Metall-Polymer-Stromkollektoren in Batteriezellen wollen die Projektpartner Aluminium- bzw. Kupfer-Polymer-Stromkollektoren dediziert an die Anforderungen des jeweiligen Zelldesigns anpassen und optimieren.

 

 

Details

Provider of the funds: Bundesministerium für Bildung und Forschung (BMBF)
Project funding reference number: 03XP0408A
Project duration: 01.08.2021 – 31.07.2024


PolyCollect

Investigations into technologies for new, super-light current collectors for batteries

Electrical energy storage systems are key components for the success of electromobility. Range extension of electrical powered vehicles and lowering the cost of energy storage are driving factors for battery development.
The project fits into this technology development trend. The aim of the project is to increase the gravimetric and volumetric energy density of the battery. The work focuses in particular on the current collectors as the component of the battery, which represent a connection between the interior of the battery cells and the external circuitry. So far, these current collectors have been made exclusively from thin metal foils.

As part of the PolyCollect project, a production technology is to be developed that allows these metal foils to be replaced by coated plastic foils.

 

 

 

Details

Provider of the funds: European Fund for Regional Development
Project funding reference number: 100384758
Project duration: 01 Oc­to­ber 2019 - 30 June 2022


TUKAN

Tunnel contacts on n-type for the metallization by means of screen printing

The goal of the project TuKaN is to make contacts that are passivated by means of tunnel oxide usable for the industrial manufacturing of solar cells using screen printing metallization. A scalable deposition method for the single-sided high-rate deposition of a-Si:H layers at high temperatures shall be developed, along with an industrial process for nPERT solar cells with a passivated backside contact and the core components for a completely passivated screen-printed solar cells.

The approach of the consortium is to achieve highly doped poly-silicon layers by crystallizing deposited amorphous silicon layers (a-Si:H) and to optimally provide them with a contact layer by means of a special screen printing method. Furthermore, a PECVD source for high-temperature applications shall be developed and be compared with a newly-developed Cat-CVD source. For this purpose, a corresponding demonstration coating system for inline processing will be assembled at the ISC Konstanz. 

Details

Provider of the funds: Federal Ministry for Economic Affairs and Energy (BMWi)
Project funding reference number: 0324198B
Project duration: 01 October 2017 - 31 March 2021

 


3D-SSB

3D electrode structuring to increase the power and energy density of all-solid-state batteries

The project is aiming at significantly increasing the power density of all-solid-state batteries (ASSB) by the targeted structuring of high-capacity cathodes. The focus is on the process chain for an industrialization of the corresponding 3D-structured electrodes.

For that purpose, a structure model kit shall be developed for abrasive and synthesizing methods for the targeted 2D- and 3D structuring of all-solid-state cathodes.

Within the subproject, VON ARDENNE will contribute their existing and vacuum deposition technologies, particularly evaporation and particle coating as part of the structure model kit.

Details

Provider of the funds: Federal Ministry of Education and Research (BMBF)
Project funding reference number: 03XP0202B
Project duration: 01 February 2019 - 31 January 2022


DYNASTO

Dynamic deposition of a-Si:H and TCO layers for high-efficiency silicon heterojunction solar cells as a key for high-volume production at reduced manufacturing costs

DYNASTO targets the development of dynamic deposition methods for the creation of transparent contact layers (transparent conducting oxide, TCO) and amorphous silicon passivation and contact layers for the high-volume manufacturing of solar cells with an increased efficiency. The focus of the development work on PVD coating methods for TCO deposition is on silicon heterojunction cells (SHJ).

The PECVD deposition of doped aSi thin-film layers, however, aims at the application in TOPCon-like cell concepts with passivated contacts based on a layer stack consisting of silicon oxide and a polycrystalline silicon thin-film layer. The crystallinity is created by a subsequent high-temperature step.

Details

Provider of the funds: Federal Ministry for Economic Affairs and Energy
Project funding reference number: 0324293A
Project duration: 01 January 2019 - 31 December 2021

 


3D-FF

Sophisticated freeform coating of flat and three-dimensional substrates

The main goal of the project is the highly precise freeform coating of large substrates, i.e. the creation of very defined layer thickness profiles on three-dimensional surfaces.

The technological basis is magnetron sputtering in an inline arrangement, which enables the creation of large-area layer systems at the high precision and quality that is required in optics. The size of the substrate (diagonal or diameter) shall be as big as 500 millimeters.

The technologies developed within this project shall also be usable and scalable for substrates exceeding that size.

Details

Provider of the funds: European Fund for Regional Development
Project funding reference number: 100354097
Project duration: 01 March 2019 - 28 February 2022


KODOS

Customized thin glass composites for optoelectronic systems

The aim of the project is to research the technical and technological basics of a value chain for flexible glass and glass composites in different optical and optoelectronic applications. The focus is on roll-to-roll processing to enable a commercial use of the photonic high-tech material thin glass.

The innovation the project is aiming for is a combination of coating and lamination as well as the development of a production-ready transition of the processed roll to a semi-finished product that is ready to install. Both these steps are extremely challenging, especially due to the unique mechanical properties of the thin glass.

As a result, the consortium, which represents the whole value chain of thin glass processing, will be able to offer a complete kit of raw materials, semi-finished products, tools and technologies.

Details

Provider of the funds: Federal Ministry for Education and Research (BMBF)
Project funding reference number: 13N14601
Project duration: 01 March 2019 - 28 February 2022


HZwo FRAME

New methods for the high-volume production of metal bipolar plates

Based on results gained during the small-scale production of metal bipolar plates for fuel cells in the automotive sector, this project focuses on researching new production methods for the high-volume production of metal bipolar plates and on proving their functionality. This includes the necessary quality assurance and cost reduction measures.

Production chains shall be developed that connect all the production steps from recasting over coating and mating to quality inspection. This subproject is dedicated to the technological requirements of the coating for mass production starting from the roll material.

Details

Provider of the funds: European Fund for Regional Development
Project funding reference number: 100343840
Project duration: 01 June 2019 - 31 Mai 2022


Jumbotrough-REFLEKTOR

Development of a robust, large-area parabolic trough reflector

The project is aiming at developing a new production method for large-area, laminated glass mirrors and to prove its feasibility by manufacturing prototypes of parabolic trough mirrors.

The novel mirror concept approaches the creation of a mirror based on a precisely bent carrier glass, which is bent using an innovative bending measure. A thin flat glass coated with a PVD method is laminated on this bent carrier glass. Therefore, the parabolic trough mirror that is to be developed will have a higher reflectivity compared to commercial ones.

Details

Provider of the funds: Federal Ministry for Education and Research (BMBF)
Project funding reference number: 03EE5037E
Project duration: 01 December 2019 - 31 May 2022


SpuTOPiA

Sputtering of passivated contacts based on the TOPCon technology with the help of industrial equipment technology

Subproject: In-situ sputter processes of highly doted poly-silicon layers

After the industrialization of the PERC cell, the next development step on the technological roadmaps of many companies in the photovoltaics industry is the integration of selective back side contacts that are passivating on the whole surface, as well as, on the long run, the development of tandem solar cells.

For both concepts, charge carrier-selective contact systems are a key technology. The project focuses on the in-situ deposition of n-doted silicon layers by cathode sputtering, which can evidently reach a cell efficiency of ≥ 23.5 % in solar cells with TOPCon structures but with diffused emitter.

In this project, a process sequence for creating a TOPCon layer stack shall be developed that can be implemented on industrial scale, based on a crystalline silicon substrate consisting, preferably, of a wet-chemical boundary layer oxide and a doted poly-crystalline silicon thin-film and, optionally, a silicon nitride. This shall be achieved with the help of high-throughput PVD equipment.

Details

Provider of the funds: Federal Ministry for Economic Affairs and Energy
Project funding reference number: 03EE1068A
Project duration: 1 October 2020 - 30 September 2022

 


Production/Internet/Live